Have you ever wondered at some point in your life, ” What should I do if my key will not turn into an ignition?”
The best thing you can possibly do is to keep everything simple.
Below are some simple solutions you can use to solve a key issue that will not turn on the ignition.
Some seemingly simple repairs can get complicated, so be sure to ask for something that adds weight to your repair.
Turning the Steering Wheel
This guide, which results from our team’s exceptional research, will explain the most common reason that the car key will not turn is the steering wheel lock.
This often happens when the steering wheel has been moved after the ignition cylinder key has been removed.
To this end, we have singled out several stages that will probably help you solve this problem.
Firstly, you will have to turn the steering wheel left and right for the purpose of finding which side the steering wheel cannot be moved.
The moment you have found to which side the steering wheel cannot be moved, you should note as well the direction that the steering wheel has given.
Then comes probably the most crucial part, you’ll have to pull the steering wheel in the direction that has been given and hold it there.
While holding the steering wheel turned, you should turn the key toward the accessory position.
And if you do not notice any change, you should rock the steering wheel while turning the key.
And if none of the above works, you should tilt the steering wheel while jiggling the key to ignition.
The turning and moving key methods can be mixed and matched. As soon as the key is turned, the steering wheel is unlocked, and the car should start.
In case the key is not turning, then you may have a much bigger problem.
Both the locksmith community and the locksmith community often debate the best locking lubricant choice, so risking controversy.
We would like would recommend using silicone or graphite-based lubricant.
In fact, you are looking for something that will not collect dust, dirt, and particles over time, which will eventually clog the inner parts of the lock to a greater extent.
In many cases, the most common reason a car key will not turn on the ignition is that the ignition cylinder key is probably slightly stuck.
In that case, you will just need to lubricate the lock.
And in most cases lubricating the lock can be just enough to solve your problem.
We can say that WD40 is often an example of lubrication of any kind, but we would not recommend it for this case.
Samely as the steering wheel turning, we’ve singled out the most common phases of lubricating a lock.
Firstly you will have to gather all the necessary equipment, including:
- A cloth
Then you will need to look for the keyway of the ignition cylinder.
The moment you find it, you will have to spray the lubricant in it.
If there is an overspray or anything is leaking from the keyhole, make sure you wipe it.
When everything is done, you should insert the key and turn it in.
In case the key is not turning, make sure you jiggle the key.
And if this does not work as well, you will probably have to repeat the whole procedure.
When some time has passed, and the key will not turn in the ignition, then the lubricant is not the answer to your problem.
It is well known that springs can sometimes get lost, or other small parts can get stuck inside the lock.
The lubrication may fail to separate or cause things to move correctly.
For that purpose, you may need to temporarily shake things into positions so that the key works properly.
In addition to lubrication, you may need to try something more profound to detach the lock.
Appropriately, the pushbuttons do not work in cars, but using a hammer or vibrating mechanism and your key will not spin in the car, you may be able to solve your problem.
Usually, this rapping, generally if desired, is intended to shake the lock’s internal components in the proper position.
The tool you are going to use does not have to be a hammer.
In fact, anything that can create a detectable vibration that can be applied to a wrench or cylinder could be used as a tool.
The idea is to make the inside of the lock move more than you can by shaking the key, the dashboard, or even the car.
To rap a key, first of all, you will have to place the key from the car in the car’s ignition.
Then, while trying to turn the key, you will have to use the tool on the key.
In case this does not work, you will have to use the tool on the ignition cylinder.
It is also essential to note that you will have to be extremely careful about the forcing amount you use in this process.
You may damage the key, ignition mechanism, etc.
Also, you will have to work with great caution because your desire to break things down could be more successful than you think.
Fixing the Key
Probably the most crucial part of this procedure is finding out why your key does not work.
This will likely allow you to discover in many different ways the various complications that can be solved.
As long as you can remove the key when the car key does not turn on the ignition, you should be able to examine the car key.
It is not so unusual that sometimes the problem is with the key you are using, and often resolving that failure’s particular point is the only option to resolve the whole situation when the ignition key does not turn.
In case the key is broken, do not lose hope because the broken key sometimes could be fixed.
This is not always the case, but it is possible.
When we are talking about the phases with which you could easily resolve the problem, we often mention the car key sparing, which means that you will have to try sparing the car keys hoping that a different key will work.
It is also essential to note that fixing the key can be very simple.
You just have to know what the problem is.
If the problem is not visible, the problem might be hidden in the electronics.
Replacing the key
The most simple correction when something is wrong with your car key is to replace the key, which means that there is always a way to copy a broken key.
No matter how broken the key is or whether this is something you do yourself or a task you have agreed on, there is always a solution.
Regarding how much it costs to duplicate car keys, the number will increase or decrease depending on how much you do yourself.
Contacting your agency is the option that costs the most because it is the most obvious and does not require real-time research.
Getting a locksmith that is average in terms of price and doing the whole thing on your own is the cheapest option.
Ignition Cylinder’s Replacing
As long as you buy the right ignition cylinder, replacing the ignition cylinder does not have to be complicated.
Make sure you have purchased the right product for your make and vehicle model, and understand that this procedure will have you left with an ignition key unique to your car door/trunk key.
Requiem will be needed to fix this problem.
Of course, if the problem is not in your key, then the reason your car key will not turn on the ignition may be due to a faulty ignition cylinder.
You probably will not have to replace the entire ignition assembly.
And unless your car ignites when the key is finally turned, you will not need to replace the ignition switch.
When it comes to the phases, there are a few more than the ones above.
Firstly, you will have to turn the key to the accessory position.
Then, on your ignition assembly, try to find the locking pin, and once you’ve found the locking pin, a correct sized tool to depress it. Then you will have to pull the ignition cylinder loose.
And it is essential to mention that you may need to shake the ignition cylinder loose.
Then you will have to insert the new key into the ignition cylinder.
The next step is fitting the new ignition cylinder into its housing.
Then you allow it to lock in place and remove the key.
With all that done, the final step is to find out if the car will start and make sure that the key will not turn in the car ignition.
What if the Key Will Not Turn in the Ignition?
If you have a new car, it is unlikely that the key or ignition is worn out.
But if there is evidence of progress, the reason your ignition key will not turn can not be something as simple as locking the steering wheel.
In this case, if you can not unlock the steering wheel and you do not know why your key will not turn on the ignition, it is time to call a locksmith.
When the reason is the key, we can say that a locksmith is often the best option for solving the problem when something goes wrong with your car key.
Unless you have a spare key, an avenue such as a construction store will not be able to provide you with a duplicate after the key is broken.
The locksmith will have key cutters and spaces for each type of car, and if the key is worn or broken, there is no problem because the new key can be cut from the code.
Where a dealership can get you out of the coal, a locksmith can deliver all the necessary services at a more competitive price.
And in case the key will not turn because of the ignition cylinder, we can say that replacing the ignition cylinder can be quite complicated in a specific case just like this, where you cannot turn the ignition key.
Removing the steering wheel covers or manipulating the key as needed can create many opportunities for further damage to your car.
Therefore, when the car key does not turn on the ignition, do not let this lead to a mechanical request and a lot of money.
Turn on the locksmith before things get out of hand.
It is well known that ignition cylinder problems are one of the most challenging ones to detect and repair and are often overlooked when people try to find out why their car will not start or why the key will not turn in the ignition car.
Although it is possible to do this work yourself, a locksmith can solve all the complications that will get stuck in their head.